62 190₴

COMMANDOS Power Station 29.4V/3200W/5.75kWh + MPPT

COMMANDOS charging stations
Our own production

Battery: 29.4V with a capacity of 5.75 kWh

Rated power: 3200W

Input voltage: 29.4VDC

Output voltage: 220VAC±5%

Frequency: 50Hz±3

Output waveform: Pure sine wave

Soft start: yes

Charging current: 75A

Wi-Fi monitoring: yes

Generator type for charging: any // inverter type recommended

Charging priority: Grid

Switching time: <10 ms

MPPT solar charge controller

Max. solar panel voltage 450 VDC

MPPT voltage range 60-400VDC

Max. charging current from solar panels 60A

Number of MPPT trackers / max. input current 1/20A

Supported battery types: lead-acid /VRLA/AGM/Deep Cycle/Gel/Flooded/Tubular/Lithium-Ion

Cooling method: Intelligent Cooling Fan

Protection: Battery Low Voltage & Over Voltage, Over Load, Over Temperature, Short Circuit

BMS: active, with Bluetooth and balancing at 1–2A — battery voltage and other parameters can be seen on your phone in real time

Operating temperature: -10℃-+50℃

Charging time 0–80%: 2 hours from a 220V grid (75A × 29.4V = 2,205W)

The USB and Type-C outputs work without the inverter — gadgets are charged directly from the battery, with no idle-running losses

Cells: lithium-ion, energy density 288 Wh/kg

Wall mounting: mounting points are provided on the bottom — the station can be hung on a wall to save space

Dimensions (L*W*H) (cm): 48.5 x 37 x 27.5

Weight (kg): 43

Out of stock

Discounts are available for military units and charitable foundations. Call: +38 050 083 9032
  • Made to order
  • 6-month warranty — terms
  • Cash on delivery, card or invoice for organisations
  • Nova Poshta, UkrPoshta, Mist Express or pickup in Kharkiv — details
SKU: 000105567
Tags:

Description

COMMANDOS Power Station

29.4V / 3200W / 5.75kWh + MPPT

Welcome to the page dedicated to the portable power station model “Commandos 29.4V/3200W/5.75kWh + MPPT”!

The “Commandos 29.4V/3200W/5.75kWh + MPPT” model is equipped with a powerful 29.4V battery with a capacity of 5.75 kWh and a 3200W inverter with a built-in charger and an MPPT controller for charging the battery from solar panels. This combination provides reliable autonomous 220V power anywhere it is needed. That is especially important in combat zones! Our portable power stations already help our defenders in the combat zone when using the Starlink system (providing autonomous operation of satellite internet for 45-55 hours), and allow the military to charge all the necessary gadgets right on the battlefield, including radios, thermal imagers, drone batteries, sights, tablets, phones and many other devices. The battery of this station can also be charged using solar panels, which can be purchased separately. A generator can also be used to charge the station.

“Commandos” power stations are an ideal choice for military personnel who need a reliable, autonomous and high-quality power source in extreme conditions. Our products are developed with professional military standards in mind, to provide you with reliability and high performance even in the most difficult situations.

The station’s battery operates under the supervision of an active BMS with Bluetooth. From your phone you can see the voltage of each cell group, the current, the temperature and the charge level — in real time, without opening the case. Active balancing at 1–2A evens out the cells: the battery does not lose capacity due to self-discharge of individual groups and degrades more slowly. Protection switches off the load in case of overload and overheating, reducing the risk of ignition, while the optimal charging mode extends the battery’s service life.

Charge phones, tablets and radios through the built-in USB and Type-C outputs without turning on the inverter. The inverter consumes up to 40W even when it is doing nothing, so while charging a phone at 20W most of the energy goes not to the phone but to the operation of the inverter itself — only about a third is used usefully. Through the USB outputs the current goes directly from the battery, and the station’s charge is used up several times more slowly.

The station is built on lithium-ion cells with a high energy density — 288 Wh per kilogram. That is considerably more than lithium iron phosphate (LiFePO4) batteries: a system of the same capacity built on phosphate cells would weigh noticeably more. A station of this weight is not carried by hand, but two people can load it into a vehicle and carry it from the car to the work site — a phosphate equivalent of the same capacity would already be a stationary installation. This is a solution for command-and-staff vehicles, command observation posts and permanent deployment points, where a large energy reserve and high power for connected devices are required.

From 3 to 6 kW of solar panels can be connected to the station — that is already the basis of your own solar power plant for a small house or a country cottage. In spring and summer such a set covers most of the daily consumption: the station accumulates energy during the day and gives it back in the evening. For a small property this is practically full autonomy.

The station charges quickly, and that is decisive during scheduled power outages. Even if electricity is available only two hours a day, that is enough for the station to take on a charge and keep the home running until the next window. And in summer, together with solar panels, the reserve is replenished throughout the day — and the outages stop being felt at all.

We are confident that the portable power station “Commandos 29.4V/3200W/5.75kWh + MPPT” will become a reliable partner in your adventure and military activities. Contact us and we will help you choose the optimal solution for powering vital devices.

Additional information

Weight43 kg
Dimensions48.5 × 37 × 27.5 cm
Connector

4x USB Type A

There are no reviews yet.

Be the first to review “COMMANDOS Power Station 29.4V/3200W/5.75kWh + MPPT”

Your email address will not be published.

BMS setup app

This product has an active BMS with Bluetooth. Your phone shows the voltage of every cell group, the temperature and the balancing current, and lets you change the settings. The app is free.